Garage Works - 9/28/2024

After the race, I settled into the garage and got through cutting the track box hole.

First was marking the centerline.  I always do this at least twice (and most times I end up adjusting).

I also have to deliberate the actual foilblock position.  I used No.32 as a guide and did some calculations based on the overall length of each board.  I settled on 8.5" up from the tail - and this was where the calcs indicated placement, as well as the eyeball test.

All marked up.  Now it's time to make a huge mess.

And my OCD kicks in - frequent stops to vacuum up the cut foam...

And here it is all cut out.

I didn't take pictures, but I got the block glued in last night.