Garage Works - 2/21/2026

With all the rain, I figured I would knock out some repair orders.

I broke out the sewing machine and fixed Prayot's Ozone Pocket Rocket 3.5

Three of the baffles -

And one of the leading edge cells...

This was pretty therapeutic -  

And to make sure there was progress on Roland's board (boards take up space, parawings not so much), I cut out the patches for the delamination.

Four layers of 4.8 ounce carbon.

I didn't mix epoxy - I'll do that tomorrow.

Once the epoxy is hard, I'll route out the slots and glue in the insert blocks.

Then I'll roughen up the deck, epoxy on some patches over the blocks, and let that harden.  After that, I'll fair in everything and place a carbon cap sheet.

This should be done this week - then I'll move to finish the tow boogie (placing a new track block), then I'll change out the tracks on the two wingboards that I have here at the house (to modernize them).