And also from yesterday - I spent some time in the garage trying to get No.41 over the finish line.
After remembering I had a trench in this board, I looked to see if the area I cut to place the back foot strap was clear of the trench - NOPE.
That made my decision to fill and patch easy - so no foot strap inserts on No.41
After thinking about the repair, I figured it was easiest just to fill with milled fibers/epoxy, then add carbon patches above the cut areas.
And here it is all patched and waiting for the epoxy to harden.
I had already pulled the peel ply and added the fill coat last night, and this morning I sanded and sprayed clear coat - but that's for another post.
No comments:
Post a Comment