Garage Works - 10/10/2025

I used two cans of clear coat to get No.41's nose redone, and to get No.42 all covered.

Here's No.41

I think the nose got hot in the bag and the epoxy deformed (the clear coat).  I sanded the rough stuff off and sprayed on new clear coat.

And with No.42 being a new build, it got the bulk of the clear coat.

Bottom deck

Top deck.  I actually sprayed this portion first before I went to WPB.  When I got back the top deck was largely dry and I placed the deck pads before spraying the bottom deck.

I had to sand off some runs and respray.

And side view with the nose on the left.

Of note, the spray sometimes turned milky - but if you leave it alone it dries clear.

Now that this board is finished, the forecast shows declining wind through Tuesday.  Of course it would...