I jumped from working on the bottom of the board over to the top.
First I drilled marker holes so I could remove the deck pads where I need to cut the deck skin.
The deck pads came off nicely, so they can be reused.
I took the reinforcement blocks and marked the locations so I could cut the deck skion.
The front insert for the back foot fell on the handle
I went ahead and filled the handle with pour foam
And I got the excess cut off and everything sanded flush
I marked out the cut lines, used the dremel to cut the top skin, and went ahead and pulled the laminate off.
Marlon's car is now parked in the garage... if he heads out tonight, I'll use the laminate router and dig out the foam from the slots. And if there is time, I'll gorilla glue in the blocks. If I get this far, tomorrow I can router out the insert slots and get those epoxied in place.
I'm trying to get this done by Wednesday... which means it'll be done by Friday.
