This evening I sanded the excess glue off the inserts. I also sanded more around the edges to make sure the epoxy would have a good mechanical grip.
The gorilla glue did a great job filling the gaps around the insert blocks.
And I cut out the carbon patches and taped up the insert holes.
I used patches to focus the layers in the areas under Roland's heels. And patches work just fine since a majority of the carbon will be under deck pad (so you won't see it).
I used 7 ounces of resin - but probably an ounce and a half was on the roller.
Tomorrow I'll sand all the laps flush then add a tinted layer of epoxy to get everything smooth and level.
With that add, this will likely be done Wednesday evening.
No comments:
Post a Comment