Saturday, November 21, 2026

Garage Works - 11/21/2026

I stalled my daily water time to get some extra sleep and then to get this board across the shaping finish line.

I used the planer to get the excess glue off, and even the dremel on the topside, but after that, to fair everything in I used all the shaping hand tools again - rough surform, fine surform, 80 grit sanding screen, and 120 grit sanding screen.

I think the extra time was worth it and I was glad to have been able to salvage the track block. 


The finish is much nicer now and all the imperfections (that I can see) have been leveled out and balanced.


After catching that wave yesterday at the end of the session and riding that parawing board prone, I'm totally energized to get this board completed.


I went ahead and cut out the laminates.

Base layer of carbon covering the block up to where my chest will rest when paddling.  Then a patch forward and aft (just because I had the carbon pieces and I can't be totally sure of where my feet will touch during duck dives and other handling points).

Over that are two strips of carbon tape to act as stringers.

And lastly is a patch of innegra to protect the carbon.


With all this laminate, I'm going to use a single 6 ounce layer of fiberglass to cover everything up.  And yes I'm building this opposite of convention (top deck laminated first) - as I had originally thought about using a carbon bottom (and am still debating that option - and in that case the bottom deck laminate would need to be cut short and covered with rail tape; I can color the top with the laminate coat of epoxy - those decisions still have to be made - I can also just use carbon tape and fiberglass).


I'll likely place the epoxy and fiberglass tonight.

And then looking at how I can make more space in the garage, I saw this mast that Eli gave me so I can set up my tow boogie (converted super short prone board) 


It cut easily with the grinder.    


And here it is with the universal motor pod mount.


Got lots done this morning!  Now its time to parawing!

No comments: