This evening I got Ken's longboard back to him (whew) and I cleared using the Cabrinha H800 for a little longer provided I fix some of the scratches.
Then I waited for the sun to go down (while cooking dinner) and then sanded the laps on No.32
Through the sanding process, I found a few spots that needed to be addressed with epoxy.
This spot had an air bubble when the carbon was setting up. I cut the fabric to get an approach to the loose area, chopped a few lengths of carbon fiber, then epoxied under the fabric and layered the carbon strands over it.
I had a couple of openings closer to the boxes. A little epoxy and these should be resolved.
And lastly, I added some fill resin where the bottom deck logo sticker will go. I'll sand it down a bit tomorrow, then apply the decal, and place the remainder of the fill coat then.
I think tomorrow's workload will include preparing the top deck laminate, and getting it in place with epoxy. I'll have to cut out the deck patches and cover the foot strap inserts.
No comments:
Post a Comment