When I got home, I put everything away (the garage is for parking two cars now) - but with La and Noe at a flute workshop and Marlon at a class, I had the full garage free to work on this board repair.
I got the slots routed out. Then I fit the boxes, taped them up and cut out the carbon patches.
Then I epoxied in the boxes.
Added each layer of carbon individually -
Making sure to burp the area around the boxes -
Then finished with the cap sheet.
I used 3.5 ounces for the boxes, then 5.6 ounces for the carbon overlays. I used a brush to apply the epoxy and to make sure there were no bubbles or unlevel spots.
Tomorrow I'll grind the boxes open, sand the high spots, and place the fill coat.
Thursday I'll sand and place a second fill coat if needed.
Friday I'll try and finish the repair so I can get it to Kalani on Saturday morning.
No comments:
Post a Comment