Finished with the First Batch of Rear Stabilizers

I finished the first three rear stabilizers.  Started out by foiling number three, sanding it with the 60 grit to get it faired in, and then took all three through the 60-120-180-220-320 sandings.

Then I used 500-1000 wet sandpaper to bring the sanding to an end. 

I found the centerlines again (the original markings were long sanded away), marked the 30mm spacing and drilled pilot holes.  Then I drilled the 7/32 holes for the screw bodies.  And last I drilled the counter-sunk space.

I put the labels on and let them dry.  Tomorrow I'll spray some clear coat on and "DONE"!