Another one of the foilers at the beach asked me if I could repair his cracked fuselage. I said I'd give it a try. I had to clean out the polyester resin the previous guy who tried to repair it used. They I tried to see if the crack was clean enough by clamping it.
Not the prettiest thing out there, but this is as close as I could get it (still some polyester stuck in there somewhere).
I didn't take any pictures, but I did fill it with epoxy and milled fibers. This afternoon I used the grinder and sander and got it faired back in.
Now the hard part - putting the M6 inserts in place. Going to use the drill press to make sure the holes are straight up and down.
No comments:
Post a Comment