This was yesterday's progress. I sanded edges and grinded open the mast track boxes in preparation for laminating the rail tape onto the board.
Here is the 3" tape all staged.
And this is the rail tape all trimmed with relief cuts made and everything held in position with painters tape.
And here is the epoxy going on the rail tape. I used 3.5 ounces and it was the perfect amount to cover the 3" tape running around the majority of the board, and the 1" tape going around the nose section.
I saran wrapped the areas where I had made relief cuts to minimize any major sanding evolutions.
Next I'll do some light sanding to feather out the interfaces, apply the logos and get a fill coat on the bottom deck.
No comments:
Post a Comment