Monday, May 9, 2022

Garage Works - 5/9/2022

I actually got home with enough time to pour the epoxy for the repair I'm working on.

3.5 ounces to set the boxes in their slots.

4.2 ounces to saturate the carbon cap sheet and make sure the boxes were filled.


All done.  I used the peel ply to make sure the carbon was tight against the boxes (to hopefully avoid air gaps and the subsequent filling steps).


Remaining steps - open the boxes, feather in the edges, add fill coat, sand, fill, sand, wet sand, apply clear coat and done.

No comments: